PRIMERGY BX600 S3, Руководство по оборудованию

Страница: 78 / 143

78
Chapter 5 CLI
●
15. Agent DNS (1_1_15)
Sets DNS of the Management Blade.
●
17. Agent NTP (1_1_17)
Sets Network Time Protocol (NTP) of the Management Blade.
❑
: Parameter
Parameter Contents
1. Set DNS IP Address_1 Enter the IP address of the primary DNS server.
2. Set DNS IP Address_2
Enter the IP address of the secondary DNS server.
Parameter Setting Contents
1. Set NTP ENABLE
❑
enable
❑
disable
Sets NTP enable/disable.
If NTP is enabled, the time of the Management Blade is
synchronized with the NTP server periodically. Specify the
synchronization formation In "(4) Sync Mode".
+------------------------------------------+
| |
+------------------------------------------+
Agent Network DNS page_1_1_15
(1) Set DNS IP Address_1 : 0.0.0.0
(2) Set DNS IP Address_2 : 0.0.0.0
Enter selection or type (0) to quit:
+------------------------------------------+
| |
+------------------------------------------+
Agent NTP page_1_1_17
(1) Set NTP ENABLE : disable
(2) NTP Server IP
(-) The Lastest Sync Date/Time : Not Ready
(4) Sync Mode : Sync Afterward
Enter selection or type (0) to quit: