PRIMERGY BX600 S3, Руководство по оборудованию

Страница: 135 / 143

135
PRIMERGY BX600 Management Blade Hardware Guide
5.4.4 Logout
Logs out and returns to the login screen.
5.4.5 Reboot
Reboots the Management Blade.
Select (1) and the following screen is displayed and then Management Blade is rebooted.
L
Even if the Management Blade is rebooted, the main power supply and Server Blade power status is
maintained.
If rebooted, the master and slave of the Management Blade will switch. When connected to the CLI
using LAN interface, because the connection will be temporarily disconnected, reconnection is
necessary.
When connected using serial interface, refer to "5.3 CLI Login" ( p.67) and reconnect the master.
+------------------------------------------+
| |
+------------------------------------------+
Reboot Selection: [1] Yes or [0] No page_6
(1) Yes,Reboot Now!
Enter selection or type (0) to quit:
+------------------------------------------+
| |
+------------------------------------------+
Management Blade Reboot Now! page_6_1