PREVOST LE MIRAGE XLII BUS SHELLS, Руководство по обслуживанию

Страница: 1210 / 1260

TABLE A
DISTANCE TRAVELED
1
(miles / km)
LUBRICATION AND
SERVICING SCHEDULE
Item Month
s
6 250 / 10 00
0
12 500 / 20 0
00
18 750 / 30 0
00
25 000 / 40 0
00
31 250 / 50 0
00
37 500 / 60 0
00
43 750 / 70 0
00
50 000 / 80 0
00
56 250 / 90 0
00
62 500 / 100
000
68 750 / 110
000
75 000 / 120
000
81 250 / 130
000
87 500 / 140
000
93 750 / 150
000
100 000 / 16
0 00
0
106 250 / 17
0 00
0
112 500 / 18
0 00
0
118 750 / 19
0 00
0
125 000 / 20
0 00
0
131 250 / 21
0 00
0
137 500 / 22
0 00
0
143 750 / 23
0 00
0
150 000 / 24
0 00
0
156250 / 25
0 00
0
162 500 / 26
0 00
0
168 750 / 27
0 00
0
175 000 / 28
0 00
0
181 250 / 29
0 00
0
187 500 / 30
0 00
0
193 750 / 31
0 00
0
200 000 / 32
0 00
0
250 000 / 40
0 00
0
300 000 / 48
0 00
0
LUBRI
CAN
T /P
ART
2
07 TRANSMISSION
3
Allison transmission equipped with retarder ,
change fluid and filters (if filled with non-TranSynd or non-TES 295
fluid)
16 6 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
I, P12
Allison transmission equipped with retarder , change fluid (if filled with
TranSynd™ or TES295 synthetic fluid only, no mixture)
4
16 48 ● H
Allison transmission without retarder ,
change fluid and filters (if filled with non-TranSynd or non-TES 295
fluid)
16 12 ● ● ● ● ● ● ● ●
I, P12
Allison transmission without retarder ,
change fluid (if filled with TranSynd™ synthetic fluid only)
3, 5
16 48 ● H
Allison transmission with or without retarder ,
change filters (if filled with TranSynd or TES295 synthetic fluid only, no
mixture)
16 12 ● ● P12
Transmission oil cooler, replace unit if vehicle is equipped
with transmission retarder
24
09 PROPELLER SHAFT
Grease one fitting on each universal joint and slip joint 34 6 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● K
11 REAR AXLE
Differential, check oil level, add if necessary 35 6 ● ● ● ● ● ● ● ● E
Differential, change oil, clean breathers 35 12 ● ● E
Differential, change oil, clean breathers (with full synthetic oil) 35 48 ● E
Tag axle lever pivot, grease one fitting on each pivot 15 6 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● K
1
Proceed to maintenance operation at distance indicated on odometer or specified number of month, whichever comes first.
2
See paragraph 2.3 & 2.4 of this section for lubricant specifications and part numbers.
3
Allison Transmission recommends that customers use fluid analysis as the primary method for determining fluid change intervals. In the absence of a fluid analysis program, the fluid
change interval listed in the charts above and below should be used. Change filters according to the charts above and below even is a fluid analysis shows that the fluid doesn’t need
to be changed.
4
When the transmission contains a mixture of fluids (defined as the quantity of non-TranSynd/ non-TES 295 fluid remaining in the transmission after a fluid change combined with the
quantity of TranSynd™ required to fill the transmission to the proper level), perform the fluid and filter change according to the non-TranSynd™/non-TES 295 intervals.
5
Extended TranSynd™/TES 295 fluid and filter change intervals are only allowed with Allison High-Capacity filters. If using Gold Series filter, refer to TABLE 3 in Section 7 of this
manual for proper fluid and filter change intervals.