GB
- 18 -
0800-GB-Techn. Daten_2181
TECHNIC AL DATA
Position of Vehicle Identification Plate
The factory number is imprinted on the accompanying Vehicle
Identification Plate (as shown) and on the frame. Guarantee issues
and further inquiries cannot be processed without the factory number
being stated.
Please enter the number onto the front page of the operating manual
immediately after taking delivery of the vehicle/implement.
The defined use of the rotary tedder
The „
HIT 610 N/ NZ
“ rotary tedder is intended solely for normal use in agricultural work.
• For the tedding, turning and raking of green and raw fodder and silage.
Any other uses outside of these are regarded as undefined.
The manufacturer takes no responsibility for any resulting damage which occurs henceforth. The risk is carried by the user alone.
• The keeping of operating, service and maintenance requirements layed down by the manufacturer also come under the heading of „defined
use“.
Technical data
Necessary connections
• 1
single-action hyfraulic connection
pressure min.: 100 bar
pressure max.: 180 bar
• 7-pole electric connection for lighting (12 Volt)
Optional equipment
• Feeler wheel
• Rear mounting assembly for feeler wheel
• Winding protection
• Mechanical locking
• Hydr. adjustment for boundary tedding attachment (AZ, NZ)
• Trailer rocker KAT I/II
• Lighting
All data subject to revision.
Description
HIT 610 N / NZ
(Type 2181)
Machine width in working position
[m]
6,00
Working width
[m]
5,75
Transport width - folded up
[m]
2,85
Maximum height
[m]
2,97
Transport height
[m]
3,50
Number of rotors
6
Tine arms per rotor
5
Diameter of rotor
[m]
1,30
Required power
[kW/PS]
20 / 27
P.t.o. speed max.
[rpm]
540
Tyres at the rotors
15x6.00-6 4 Ply rating
Tyre pressure
[bar]
1,5
Highest permitted speed
[km/h]
30
Weight - with three-point swivel frame
[kg]
670
Permanent Sound Emmission Level
[db (A)]
71,3
