- 13 -
9500-GB ArBeITssTeLLuNG (209)
GB
workING PoSITIoN
Conversion from transport to working position
Safety Precaution!
Changing from working position to transport position is only to be
carried out on even, firm ground.
- Stopcock opened (position E)
- Make sure that the swivelling area is free
and that no one is in danger.
Attention! The order of operation must be adhered to
when converting to working position (tedding position):
1. Firstly, lower the whole implement to the ground using the tractor's lifting gear. The
implement must stand on the ground on the two centre wheels with the outer rotors
still swivelled up.
2. Only now can the outer rotors be swivelled down into the working position.
Position servo-valve (ST) briefly at "lift" and simultaneously pull on rope (S).
In so doing, mechanical locks are eased.
. Position tractor's servo-valve (ST) at "lower". The rotor is swivelled down to working
position.
4. Pin the bolts on the slewing headstock (SB) into position A.
Important!
Only reposition bolts when the machine is in the raised position.
