background image

Dokument

 

D

GB-0600 Dokum D Anbaugeräte

-  -

ALOIS PÖTTINGER Maschinenfabrik GmbH
A-4710 Grieskirchen
Tel. (07248) 600 -0
Telefax (07248) 600-511
GEBR. PÖTTINGER GMBH
D-86899 Landsberg/Lech, Spöttinger-Straße 24
Telefon (0 81 91) 92 99-111 / 112
Telefax (0 81 91) 92 99-188

GEBR. PÖTTINGER GMBH
Servicezentrum
D-86899 Landsberg/Lech, Spöttinger-Straße 24
Telefon (0 81 91) 92 99-10 / 21
Telefax (0 81 91) 59 656

 

Machine checked according to delivery note. All attached parts removed. All safety equipment, drive shaft and operating 

devices at hand. 

 

Operation and maintenance of machine and/or implement according to operating instructions explained to the customer. 

 

Tyres checked re. correct pressure. 

 

Wheel nuts checked re. tightness. 

 

Drive shaft cut to correct lenght.

 

Correct power-take-off speed indicated. 

 

Fitting to tractor carried out: to three-point linkage

 

Trial run carried out and no defects found. 

 

Functions explained during trial run. 

 

Pivoting in transporting and operating position explained. 

 

Information given re. optional extras. 

 

Absolute need to read the operating manual indicated. 

Please check. 

     

X

According to the product liability please check the above mentioned items. 

INSTRUCTIONS FOR 
PRODUCT DELIVERY

GB

In order to prove that the machine and the operating manual have been properly delivered, a confirmation is necessary.
For this purpose please do the following:
-  sign the 

document A 

and send it to the company Pöttinger

  (in case of Landsberg equipment: to the company Landsberg)

document B

 stays with the specialist factory delivering the machine.

document C

 stays with the customer.

Содержание HIT 610 N





















Отзывы: