GB
- 1 -
0300-GB Wartung_218
maINTeNaNCe
maintenance and servicing
In order to keep the machine in good condition even after a longer
period of operation, please observe the following notes:
- After the first hours of operation, tighten all
screws.
In particular the tine connections (12 kpm), the tine bar connections
(9 kpm) and the slewing headstock connections should be
checked.
- Always keep the stipulated air pressure in the tyres.
- Grease the lubrication points in accordance with the regulation (see
lubrication schedule).
Grease the lubrication nipples with universal grease after every 20
hours of operation.
- Before leaving the machine over winter, oil all the joints well and
grease all bearings.
Intake transmission
The intake transmission runs in oil
which must be renewed or added to
after every year of operation:
- Pour gear lubricant oil into
the intake transmission (see
enclosure on fuel regulation).
Changing tines
- Remove broken tine after loosening the hexagonal nut and fit new
tine.
- For correct fitting observe the direction of the rotors!
- Tighten hexagonal screw with 12 daNm (= 12 kpm).
- Fit the safety shackle correctly (longer side (6) outside)!
Gas container
Beware!
No welding, soldering or mechanical works of any kind
may be carried out on the container.
Note
• According to manufacturer's
i n f o r m a t i o n a l l g a s
containers have a slight
pressure drop after a certain
amount of time.
• The gas loss (nitrogen)
amounts to 2- % per
year.
• After 4-5 years it is
r e c o m m e n d e d t h a t
container pressure be
checked and if necessary
corrected.
Alteration of gas container pressure
This work may only be carried
out by customer service or a
specialist.
In order to reduce or increase
the pressure in the gas container
a special filling and checking
device is necessary.
Pressure in the gas container: 80 bar Nitrogen (N).
TD 7/95/3
Drehrichtung
direction of rotation
12 kpm
