GB
300-GB Anbau_218
- -
HITCHING
Hitching of machines with three point linkage
Safety hints:
see supplement-A1 points 7.), 8a. - 8h.)
1. Pinning the machine to the three point linkage.
2. Fix the hydraulic lower link (4) in such a way that the machine
cannot swing out sideways.
. Push in the support foot (5) and secure.
- Before using for the first time, the length of the drive shaft must
be checked and adjusted if necessary (see also supplement B
"Drive shaft adaption").
Connecting hydraulic system to the tractor
For reasons of accident prevention the p.t.o. must
be switched off and the rotors must come to a stand
still before raising the side rotors.
TD34/90/4
5
4
Locking the headstock during use on roads and
when lowering
For transport the headstock (SB) must be locked using a lock nut.
A = working position
B = transport position
Important!
Only reposition the lock pin when the machine is in the raised
position.
Release rope
- Run rope (S) into tractor
cabin.
