TraNSPorT PoSITIoN
0300-GB Transp (209)
- 10a -
GB
Conversion from working to transport position
For safety reasons, turn off drive shaft and wait for
rotor to stop completely.
- Make sure that swivel
area is free and that
nobody is standing in
the danger area.
- S t o p c o c k o p e n e d
(position E)
Attention!
The order of operation must be adhered to.
1. The implement must stand on the ground on the two centre
wheels.
2. EUROHIT 69 AZ, EUROHIT 80 AZ
Pull rope (S). The stop function is raised.
. Outer rotors are swivelled
up into transport position by
operating servo-valve (ST).
4. Release rope during swivelling
procedure so that locking hooks
can engage.
- Close stopcock (position A).
Attention!
- Check whether the locking hooks (10) are locked into
position correctly.
Locking the headstock during use on roads:
For transport the headstock (SB) must be locked using a lock nut.
B = transport position
Important!
Only reposition the
lock pin when the
machine is in the
raised position.
10
10
TD/1/3
a
