GB
WORKING POSITION
- 12 -
0300-GB-ARBEITSSTELLUNG_243
TD 44/94/11
6
6a
≈
40 cm
159-02-52
max. 50 cm
Caution!
Do not enter rotor area while driving motor is
running.
Preparing for operation
1. Install all tine arms onto both rotors.
• Place tine bearers onto rotor arms and secure with linch pin.
2. Swing all guard rails (6) (left and right) to the safeguarding
position.
3. Pull trap sheet out and secure with fixing screw
(maximal 50 cm - Collision-danger).
Normal adjustment is a gap of about 40cm from tines.
4. The tine height is adjusted using the crank handle
(8)
Tines should lightly touch the ground. An adjustment that is to
deep will dirty the forage or damage the turf.
up to 2003 model
from 2004 model
