- 15 -
0700_GB-Multitast_243
GB
THE SYSTEM "MULTITAST"
Swather with „MULTITAST“ system
General
Machines with the ”MULTITAST” system have feeler wheels installed. The rotor units are therefore not rigidly fixed, but
can be swung up and down (approx. 4°) through hinges.
Using the feeler wheel enables the tines to attain optimum ground adaption (4°) even on extremely uneven surfaces.
As the tines are located quite close to the feeler wheel they are able to follow the uneven ground optimumly. The result
is very tidy raking.
Using the machine without the feeler wheel
Particular operating conditions require that the feeler
wheel (2) be removed.
• When working without the feeler wheel (2) the turning
joint of the rotary unit must be fixed. Otherwise the
rotary unit will tip down and the tines will then dig into
the ground.
However ground adaption with a fixed turning joint is no
longer optimal. For this reason, this type of operation
should be avoided as often as possible.
Machine without feeler wheeler (2)
Machine with feeler wheel (2)
Important!
Converting to
the relative
operation is
described on
the next page.
Please follow
the directions
exactly in order
to prevent
damage to the
machine.
