GB
WORKING POSITION
- 13 -
0300-GB-ARBEITSSTELLUNG_243
159-02-17
44a
L2
159-02-16
44a
R2
159-02-18
44a
M2
Two single swaths or one side swath
1. Setting for two single swaths
A second trap sheet can be used in this operating position (optional
extra).
• Swing the rear rotor to the correct position (R2).
2. Setting for a large side swath.
In this operating position only one large swath is formed on the left
side of the implement. The left rear rotor takes on the swath already
formed by the front rotor.
• The second trap sheet (44a) can be used or it can be removed.
• Swing the rear rotor to the left operating position (L2).
3. Setting for a small swath
In this operating position only one swath is formed on the left side of
the implement. The rear rotor therefore has no essential function.
• The second trap sheet (44a) can be used or it can be removed.
• Swing the rear rotor to the central position (M2).
