TRANSPORT POSITION GB
0200-GB-TRANSPORT_243
- 10 -
Changing to Transport position
Safety hints:
see supplement-A1 points 7.), 8a. - 8h.)
• Changing from working position to transport position is only
to be carried out on even, firm ground.
• For safety reasons, turn off drive shaft and wait for rotor to
stop completely.
1. Swing machine to central position
Use double action control valve (ST)
2. Lower machine to ground.
3. Slide trap sheet (9) completely in and secure with T-screw (K).
4. Swing all guard rails (10) up
The locking pins catch automatically in the final position.
5. Detach all tine arms and put on (position 1).
Attention!
All tine arms must always be taken off. The rotor could turn
by itself during travel.
6. Swing machine up into transport position (T1).
Use single action control valve (ST)
7. Close stop valves (position A)
For safety, travel on roads only with stop valves closed!
Pos. 1
A
E
TD44/94/8
ST
