Posi-Plus Line Runner 700-40, Руководство оператора

Страница: 9 / 34

Oct-18-700 Operation Page 9 of 34

All platform occupant(s) must always wear a certified CSA or OSHA approved full
body harness attached and secured to the anchor provided at the upper controls’
station before entering the platform.

All platform occupants must always wear appropriate personal protective devices at
all times (i.e. hard hats, safety shoes or boots; safety glasses, work gloves).

Never try to climb in or enter the platform, if the platform is not down to the ground.

Never place any item in the platform for the purpose of increasing work height (i.e.
planks, ladders, step stools).

Never wear climbers inside the platform.

Before entering the platform, visually inspect the unit and test operate it at the
beginning of each day by using the lower controls.
During operation

Always maintain safe clearance from obstacles, electrical power lines and apparatus.
The operator must allow for platform sway, rock or sag.

Always maintain a safe distance from overhead obstacles (including overhead
electrical power lines).

Always maintain a clear view of the path of travel when operating from the platform.

Do not exceed the platform capacity that is stated on the serial number placard.

Understand the stability characteristics of this unit before using it.

All platform occupant(s) of this aerial device must always wear a certified CSA or
OSHA approved full body harness attached to a lanyard while operating the unit from
the platform. The lanyard must be secured to the lanyard anchor (D-ring) at the boom
tip.

All platform occupants must always wear appropriate personal protective devices at
all times (i.e. hard hats, safety shoes or boots; safety glasses, work gloves).

Always stand firmly and keep both feet on the floor of the platform.

Never sit, stand, or climb on the edge of the platform.

Never place any item or equipment in the platform for the purpose of increasing work
height (planks, ladders, step stools).

Never try to climb down from the platform, if the platform is not in the stowed position
or down to the ground.

Make sure the platform floor is clear of debris, tools and other equipment that could
make the operator unstable and prevent from having both feet on the floor during the
operation.

Never belt off or tie off to an adjacent pole, structure or other equipment.

Operate the controls smoothly, avoiding rapid reversals.

Use care when getting on and off the unit and/or when entering and exiting the
platform to avoid slipping or falling. Always maintain three points contact.