Posi-Plus Line Runner 700-40, Руководство оператора

Страница: 33 / 34

Oct-18-700 Operation Page 33 of 34
improper oil, or excessive engine/pump speed. In any case, the cause of the overheating
should be identified and corrected immediately.
The oil level in the hydraulic reservoir should be checked daily as described in the daily
preoperational checks section. With the unit on level ground, booms in the boom rest, the
oil level should be between the Add and the Full marks on the filler cap dipstick or
applicable sight gauge. If oil must be added, oil of the proper type, as described in the
Maintenance Manual, should be used.
Warning
Only use pre-filtered hydraulic oils to ISO 14/12 as recommended. Other fluids added
to the hydraulic system may increase component wear, affect the lubricating
characteristics of the oil, or may induce the valves to malfunction.
OIL LEVEL
MAXIMUM
MINIMUM
OPTIMAL
CORRE
CT