3101 111th Street SW
•
Suite F
•
Everett, WA 98204
425-353-7552
•
plcmultipoint.com
207
L
Re
v1
9
Gateway Commissioning & Start-up Guide
LED Behaviors
Following is a table describing LED behaviors:
LED State
Meaning
Green (Solid)
The Gateway is operating normally
Green (Blinking)
The Gateway is going through one of a couple normal conditions that will last for a brief time.
This
includes:
2 blinks – Joining is enabled (to allow new Lighting Controllers or other devices to connect).
4 blinks – The Gateway is updating its software
Red (Blinking)
The number of blinks in series indicate a connection error.
Errors
include:
2 Blinks – The Gateway does not have an IP address.
3 blinks – The Gateway received an IP address but can’t connect to the Internet.
4 blinks – The Gateway can connect to the Internet but is unable to contact the cloud server.
Green (Solid)
Gateway is installing a new software image and will reset shortly. Do not unplug.
& Red (Solid)
If neither the green nor red LED are illuminated, review the Troubleshooting section in this document.
Once the green LED on the Gateway is solid and the red is not illuminated (indicating normal operation),
proceed to the next step.
Powering the Lighting Controllers
Refer to Lighting Controller specific documentation. However, for the L Lighting Controllers from PLC Multipoint:
• Verify luminaire voltages to ensure the proper L Lighting Controller is used. There are two versions of the
L Lighting Controllers: (a) one for 105-305 VAC; and (b) one for 315-530 VAC.
• The outdoor/exterior parking lot luminaires must always have constant power applied. It is strongly recommended
that the luminaires are wired directly to the circuit breaker. This will ensure that power always remains on the
luminaires, even during the day when the luminaires are typically turned off.
L Gateway Configuration
Installing the L Mobile App
If not already done, install the L Mobile App on the mobile device to be used for commissioning. The app is avail-
able in the Apple App Store for iOS devices (requiring iOS version 9.0 or higher) or in the Google Play Store for Android
devices (requiring Android version 6.0 or higher).
Note: Screen captures included in this document highlight the iOS experience for the L Mobile App. Although there
are slight differences in the appearance, commissioning using Android devices is consistent with iOS.