3101 111th Street SW
•
Suite F
•
Everett, WA 98204
425-353-7552
•
plcmultipoint.com
207
L
Re
v1
33
Gateway Commissioning & Start-up Guide
Unpairing Devices from Zone
Devices can be completely removed from the network, making them available to be discovered by other
L Gateways.
To unpair devices, tap on the “Unpair Devices From Network” button on the menu launched at the start of the “Editing a Zone”
section, and follow the same process outlined in the Unpairing Devices from Network section.
Renaming a Zone
To rename a Zone, tap on the “Rename Zone” button on the menu launched at the
start of the “Editing a Zone” section.
Upon doing so, a “Set Zone Name” window will launch.
Type a new zone name, then tap “Set Name” to save the new name or “Cancel”
to keep the existing zone name.
Deleting a Zone
This is a secondary method to delete a zone. The primary method is accessed from the
Zones View, while this method is accessible from the Device View for the zone that is
intended to be deleted.
Tap on the “Delete Zone” button on the menu that was launched at the start of the
“Editing a Zone” section.
Upon doing so, a confirmation screen will subsequently appear to help prevent inadvertent
deletions.
Tap “Yes” to proceed with the zone deletion. The screen will return to the Zones View if
other zones exist. If no other zones exist, it will launch the Zone Setup process.
Tap “No” to retain the zone. The screen will return to the Device View.