3101 111th Street SW
•
Suite F
•
Everett, WA 98204
425-353-7552
•
plcmultipoint.com
207
L
Re
v1
30
Gateway Commissioning & Start-up Guide
Unpairing Devices from Network
Devices can be completely removed from the network, making them available to be
discovered by other L Gateways.
To completely remove devices from the network, tap on the “Edit” button from the Device
Manager on the menu launched at the end of the “Manage Devices” section.
Tap “Unpair Devices from Network” to proceed.
Upon doing so, deletion buttons (red buttons including a “-“ symbol) will be visible to the left
of the individual devices.
If unpairing lights and unsure which light should be removed, tap the virtual switch next to a
specific light to change its state between on and off for visual confirmation.
Once certain that a device should be removed from the network, tap the deletion button next
to the device that is intended to be unpaired.
To help prevent inadvertent unpairing, the device icon will slide to the left and expose a
“Unpair” confirmation button.
Tap “Unpair” to remove the device from the network or tap anywhere in the lower part of
the screen outside of the “Unpair” button to avoid removing the device.
When finished removing devices from the network, tap “Done” in the upper left corner of the
screen to revert to the Device Manager.