3101 111th Street SW
•
Suite F
•
Everett, WA 98204
425-353-7552
•
plcmultipoint.com
207
L
Re
v1
32
Gateway Commissioning & Start-up Guide
Editing a Zone
To modify devices within an existing zone, begin in the Device View on the L
Mobile App. Instructions can be found in the “Device View” section of this document.
Tap on “Edit” in the upper right corner of the Device View. The edit feature will launch a
menu of options
Adding Lights
To scan for additional lights and switches, tap on the “Add Lights” button on the menu
launched at the start of the “Editing a Zone” section. Doing so will launch the “Scan for Lights”
process consistent with the earlier commissioning process.
Removing Devices from Zone
Devices can be removed from the current zone to allow them to be added to other zones within
the same network.
To remove devices, tap on the “Remove Devices From Zone” button on the menu launched at
the start of the “Editing a Zone” section.
Upon doing so, deletion buttons (red buttons including a “-“ symbol) will be visible to the left
of the individual devices.
If deleting lights and unsure which light should be removed, tap the virtual switch next to a
specific light to change its state between on and off for visual confirmation.
Once certain that a device should be removed from the zone, tap the deletion button next to
the device that is intended to be removed.
To help prevent inadvertent deletions, the device icon will slide to the left and expose
a “Remove” confirmation button.
Tap “Remove” to remove the device or tap anywhere in the lower part of the screen outside
of the “Remove” button to avoid removing the device.
When finished removing devices, tap “Done” in the upper left corner of the screen to revert
to the Schedule View.