TECHNICAL SUPPORT: (909) 259-6001
BLSW1016
17
PLAN OF INSTALLATION
Plan of Installation (continued):
Adjust the
Opposite Bolt
Tighten the
Arm Clamp
Insert
Output Key
STEP 5
Upon test of the installation, loosen the Arm
Clamp and rotate it until it lines up with the
notches in the Output Key.
Insert the Output Key.
STEP 6
Check the Arm Clamp adjustment. The Arm
Clamp is shipped factory adjusted. The Arm
Clamp must be tight enough to prevent slip-
page in normal operation.
Check the tightness of the Arm Clamp:
A. Remove the Output Key from the Arm
Clamp.
B. Attempt to manually move the gate.
C. If slippage occurs:
1. Loosen the Locking Handle
2. Tighten the opposite bolt.
3. Tighten the Locking Handle
4. Check the tightness of the Arm Clamp
again.
STEP 4
Once satisfied with the arrangement of the
articulated arm and bracket, weld all pieces
securely.
Paint the arm to preserve it from rusting.
BLSW1016 Manual_Layout 1 5/8/2015 5:06 PM Page 17
