Planet IGS-10020 Скачать руководство пользователя страница 94

Страница: 94 / 409

User’s Manual

4.2.14 Remote Syslog

Configure remote syslog on this page. The Remote Syslog screen in

Figure 4-2-16

appears.

Figure 4-2-16:

Remote Syslog page Screenshot

The page includes the following fields:

Object

Description

•

Mode

Indicates the server mode operation. When the mode operation is enabled, the

syslog message will send out to syslog server. The syslog protocol is based on

UDP communication and received on UDP port 514 and the syslog server will not

send acknowledgments back to sender since UDP is a connectionless protocol

and it does not provide acknowledgments. The syslog packet will always be sent

out even if the syslog server does not exist. Possible modes are:



Enabled

: Enable remote syslog mode operation.



Disabled

: Disable remote syslog mode operation.

•

Syslog Server IP

Indicates the IPv4 host address of syslog server. If the switch provides DNS

feature, it also can be a host name.

•

Syslog Level

Indicates what kind of message will be sent to syslog server. Possible modes

are:



Info

: Send information, warnings and errors.



Warning

: Send warnings and errors.



Error

: Send errors.

Buttons

: Click to apply changes

: Click to undo any changes made locally and revert to previously saved values.

Содержание IGS-10020


























































































































































































































































































































































































































Результаты поиска

Содержание IGS-10020

Отзывы:

Похожие инструкции для IGS-10020

Бренды по названию

Популярные бренды

Planet IGS-10020, Руководство пользователя

Результаты поиска

Содержание IGS-10020

Отзывы:

Похожие инструкции для IGS-10020

Бренды по названию

Популярные бренды