Planet IGS-10020 Скачать руководство пользователя страница 248

Страница: 248 / 409

User’s Manual

248

•

Logging

Specify the logging operation of this port. The allowed values are:

■

Enabled

: Frames received on the port are stored in the System Log.

■

Disabled

: Frames received on the port are not logged.

The default value is "Disabled".

Note: The logging feature only works when the packet length is less than 1518

(without VLAN tags) and the System Log memory size and logging rate is limited.

•

Shutdown

Specify the port shut down operation of this port. The allowed values are:

■

Enabled

: If a frame is received on the port, the port will be disabled.

■

Disabled

Port shut down is disabled.

The default value is "Disabled".

•

State

Specify the port state of this port. The allowed values are:

■

Enabled

: To reopen ports by changing the volatile port configuration of the

ACL user module.

■

Disabled

: To close ports by changing the volatile port configuration of the

ACL user module.

The default value is "Enabled".

•

Counter

Counts the number of frames that match this ACE.

Buttons

: Click to apply changes

: Click to undo any changes made locally and revert to previously saved values.

: Click to refresh the page; any changes made locally will be undone.

: Click to clear the counters.

Содержание IGS-10020


























































































































































































































































































































































































































Результаты поиска

Содержание IGS-10020

Отзывы:

Похожие инструкции для IGS-10020

Бренды по названию

Популярные бренды

Planet IGS-10020, Руководство пользователя

Результаты поиска

Содержание IGS-10020

Отзывы:

Похожие инструкции для IGS-10020

Бренды по названию

Популярные бренды