Planet IGS-10020 Скачать руководство пользователя страница 242

Страница: 242 / 409

User’s Manual

242

defining UDP parameters will appear. These fields are explained later in

this help file.

■

TCP

: Select TCP to filter IPv4 TCP protocol frames. Extra fields for defining

TCP parameters will appear. These fields are explained later in this help

file.

•

IP Protocol Value

When "Specific" is selected for the IP protocol value, you can enter a specific

value. The allowed range is

255

. A frame that hits this ACE matches this IP

protocol value.

•

IP TTL

Specify the Time-to-Live settings for this ACE.

■

zero

: IPv4 frames with a Time-to-Live field greater than zero must not be

able to match this entry.

■

non-zero

: IPv4 frames with a Time-to-Live field greater than zero must be

able to match this entry.

■

Any

: Any value is allowed ("don't-care").

•

IP Fragment

Specify the fragment offset settings for this ACE. This involves the settings for the

More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an

IPv4 frame.

■

: IPv4 frames where the MF bit is set or the FRAG OFFSET field is

greater than zero must not be able to match this entry.

■

Yes

: IPv4 frames where the MF bit is set or the FRAG OFFSET field is

greater than zero must be able to match this entry.

■

Any

: Any value is allowed ("don't-care").

•

IP Option

Specify the options flag setting for this ACE.

■

: IPv4 frames where the options flag is set must not be able to match

this entry.

■

Yes

: IPv4 frames where the options flag is set must be able to match this

entry.

■

Any

: Any value is allowed ("don't-care").

•

SIP Filter

Specify the source IP filter for this ACE.

■

Any

: No source IP filter is specified. (Source IP filter is "don't-care".)

■

Host

: Source IP filter is set to Host. Specify the source IP address in the

SIP Address field that appears.

■

Network

: Source IP filter is set to Network. Specify the source IP address

and source IP mask in the SIP Address and SIP Mask fields that appear.

•

SIP Address

When "Host" or "Network" is selected for the source IP filter, you can enter a

specific SIP address in dotted decimal notation.

•

SIP Mask

When "Network" is selected for the source IP filter, you can enter a specific SIP

mask in dotted decimal notation.

•

DIP Filter

Specify the destination IP filter for this ACE.

Содержание IGS-10020


























































































































































































































































































































































































































Результаты поиска

Содержание IGS-10020

Отзывы:

Похожие инструкции для IGS-10020

Бренды по названию

Популярные бренды

Planet IGS-10020, Руководство пользователя

Результаты поиска

Содержание IGS-10020

Отзывы:

Похожие инструкции для IGS-10020

Бренды по названию

Популярные бренды