Planar Dome Md2/PCI, Руководство по установке

Страница: 106 / 116

92 | Installing the Board and Driver in a Sun PCI Workstation
Changing the Console
The console appears on the first head of the first board in the
system’s probe list by default. You can change the console with
the
pci-probe-list
environment variable. If you want to
change the console without changing the probe list, change
the
output-device
environment variable instead.
You can use the
setenv
command to change environment
variables.
To use the setenv command
1. Power on or halt the system to get to the
ok>
prompt.
2. Type:
setenv output-device <device node>
These examples describe how to change the console in
Ultra 10™ and Ultra 30 systems. For more details, refer to
your Sun documentation.
3. To make the Md2/PCI board the console in an Ultra 10
system, type:
setenv output-device /pci/DOME,Md2PCI
For an Ultra 30 system, which has two PCI buses, type:
setenv output-device /pci@X/DOME,Md2PCI
where
X
is the location of the board.
For example, if the board is located at location
1f,4000
, type:
setenv output-device /pci@1f,4000/DOME,Md2PCI
4. Reboot the system.
The device node portion of the
setenv
command differs
for different Sun systems and board locations.