Planar Dome Md2/PCI, Руководство по установке

Страница: 89 / 116

Installing the PCI Solaris Driver | 75
3. Mount the CD device if your system does not automount it.
Then type:
cd /cdrom/dome
4. To transfer the software packages to the system, type:
pkgadd -d md2pZZZ.pkg
where
ZZZ
is the version number.
For example, for version 1.2.0, type:
pkgadd -d md2p120.pkg
This message appears:
The following packages are available:
1 DOMEmd2p DOME Md2PCI Display Support (sparc)
1.2.x
2 DOMEmdlib DOME MD library (sparc) 1.0.x
Select package(s) you wish to process (or ‘all’ to
process all packages). (default:all)
[?,??,q]:
5. Press <Return> to install all packages or the number 1 (one)
to install the
DOMEm d2p
package only.
Messages appear, followed by this prompt:
Do you want to continue with the installation of
the package [y,n,?]
6. Type
y
.
Messages describe the progress of the installation. Then
these messages appear:
Installation of <DOMEmd2p> was successful.
Installation of <DOMEmdlib> was successful.
You do not need to reboot your computer unless you did not
boot it with the
-r
option after you installed the board.
See page 71.