Planar Dome Md2/PCI, Руководство по установке

Страница: 95 / 116

Overriding the Default Monitor Mode | 81
res="1024x768 @ 70Hz"
This line indicates that your monitor’s resolution (pre-adjusted
timing name) is 1024 x 768 @ 70Hz.
monitor="domecolr.vda"
This line indicates that you are using a color monitor, and
the pre-adjusted timing name is located in the monitor file
domecolr.vda
.
Monitor files are located in the
/opt/DOMEmd2pci/monitors
directory. Do not modify these files unless DOME Support
advises you to do so.
board="md2pci-2hd.xqa"
This line indicates that you are using two heads (
-2hd
) of an
Md2/PCI board (
md2pci
), and that the board configuration
is located in the board file,
md2pci-2hd.xqa
.
Board files are located in the
/opt/DOMEmd2pci/boards
directory. Do not modify these files.
See the second code sample on page 79 for the second head.
When modifying the
res
line, use the exact name for your
monitor from the “Pre-Adjusted Timing Name” column in
the Resolutions and Refresh Rates table on pages 97 and 98.
To support a grayscale monitor, use
"domegray.vda"
in place
of
"domecolr.vda".
Both heads of the same board must use the same resolution.