Planar Dome Md2/PCI, Руководство по установке

Страница: 37 / 116

Configuring Display Settings on Windows 2000 | 23
Configuring Display Settings on Windows 2000
After you install the board and driver and set the default monitor
and refresh rate, you can change the resolution and refresh rate
or any other configuration options.
Determining screen assignments
Click the Identify button on the Settings tab to match screens
with boards.
Using the DOME tab to change display properties
You can change display properties (such as the resolution and
refresh rate, monitor preferences, driver options, palette options,
custom syncs) with the DOME tab after the display is attached to
the Windows 2000 desktop.
Use this tab... To set the default monitor and refresh rate for...
DOME tab Displays attached to the Windows 2000 desktop
Properties ->
Settings tab Displays not attached to the Windows 2000 desktop
The Windows 2000 operating system renumbers and reassigns
screens as they are added to the configuration. Set resolutions
or preferences only after all boards and screens are installed.
Then restart your computer to make sure the screen assign-
ments are stable.