Planar Dome Md2/PCI, Руководство по установке

Страница: 45 / 116

Configuring Display Settings on Windows 2000 | 31
To customize or add modes
1. Connect a monitor to your installed DOME board,
if necessary.
2. Return to the Settings tab, and select the test display from
the Display list.
3. Make sure Extend my Windows desktop onto this monitor
is selected, and click Apply.
The display extends to the selected test display.
4. Select Advanced -> DOME tab -> Custom Mode.
5. Highlight the Resolution of the mode you want to change.
6. Edit the Mode Values section of the dialog box to create
the mode you want.
7. Click Test.
The Display Resolution dialog box appears. The system is
about to test the customized resolution.
8. Click OK to test the mode, or Cancel to abort testing.
The test pattern displays on the screen you selected in
the Settings tab.
A message appears indicating that the new mode is
about to be tested.
9. Click OK.
Do not test custom modes on the primary display or any
sister devices attached to the primary display.
You must test a mode before you can save it.