Planar Dome Md2/PCI, Руководство по установке

Страница: 92 / 116

78 | Installing the Board and Driver in a Sun PCI Workstation
Programming the default mode
You can use a monitor controlled by another display board in
your computer to program the default monitor mode for your
Md2/PCI board.
Use the
video_mode
command to program a new default
monitor mode. For example, if you want to program mode E
on the first board in the computer, type this command:
video_mode -d /dev/md2pci0.0 -m E
To enable the blanking pedestal, use a lowercase letter when you
type the mode. For example, to program mode E with pedestal
enabled, type this command:
video_mode -d /dev/md2pci0.0 -m e
By default, blanking pedestal is disabled.
Mode
Resolution
(width x height)
Refresh Rate Color Mode
E 1200 x 1600 pixels 76 Hz Grayscale
F 1200 x 1600 pixels 66 Hz Grayscale
G 1600 x 1200 pixels 73 Hz Grayscale
I 1280 x 1024 pixels 76 Hz Color
M 1024 x 768 pixels 60 Hz Color
After you enter this command, you must reboot the computer to
activate the new default monitor mode.