p
For more details about iPod compatibility
with this navigation system, refer to the in-
formation on our website.
Map coverage
For more details about the map coverage of
this navigation system, refer to the information
on our website.
Protecting the LCD panel
and screen
p
Do not allow direct sunlight to fall on the
LCD screen when this product is not being
used. Extended exposure to direct sunlight
can result in LCD screen malfunction due
to the resulting high temperatures.
p
When using a cellular phone, keep the an-
tenna of the cellular phone away from the
LCD screen to prevent disruption of the
video in the form of spots, colored stripes,
etc.
p
To protect the LCD screen from damage, be
sure to touch the touch panel keys with
your finger and gently touch the screen.
Notes on internal memory
Before removing the vehicle
battery
If the battery is disconnected or discharged,
the memory will be erased and must be repro-
gramed.
p
Some data remains. Read
Returning the na-
vigation system to the default or factory set-
tings
before you operate this function.
=
For more detailed information about the
items which would be erased, refer to
Returning the navigation system to the
default or factory settings
on page 174.
Data subject to erasure
The information is erased by pressing the
RESET
button or disconnecting the yellow lead
from the battery (or removing the battery it-
self). However, some items remain.
p
Some data remains. Read
Returning the na-
vigation system to the default or factory set-
tings
before you operate this function.
=
For more detailed information about the
items which would be erased, refer to
Returning the navigation system to the
default or factory settings
on page 174.
Resetting the microprocessor
CAUTION
Pressing the
RESET
button clears the settings for
the AV source without clearing all the navigation
function items. Please refer to the related section
before clearing.
=
For more detailed information about the items
which would be erased, refer to
Returning the
navigation system to the default or factory set-
tings
on page 174.
The microprocessor must be reset under the
following conditions:
!
Prior to using this product for the first time
after installation.
!
If the product fails to operate properly.
!
If there appear to be problems with the op-
eration of the system.
!
When changing the combination of equip-
ment.
!
When adding/removing additional pro-
ducts that connect to the navigation sys-
tem.
!
If your vehicle position is shown on the
map with a significant positioning error.
1
Turn the ignition switch OFF.
Introduction
En
26
Chapter
01
