28
12.13.
Event log
Opens the event log mask which shows the content of the
event log in list form. All system alarms are recorded over a
longer period of time. Thus offers a complete recording of
the system alarm history.
By selecting an event, the detail mask with message ID,
time of the occurrence and event text of the triggered
event is opened.
Icon
Event class
Description
Error
Error and down-time in application/control of the system, which prevent
the flawless operation of the system.
Warning
Warnings of the application. The additional operation of the system
(sometimes with limitations) is given.
Information
Information of the application (to be adhered to!). The complete further
operation of the system is given.
12.14.
Notification
To use the functions of this mask,
Remote maintenance
must be active (existing internet connection
required).
The type of the transmission of the message is set via "
modus
".
"
Recipient
" specifies the receiver of the notification. It is important to be sure that the phone number
always starts with a
+
.
"
Language
" determines in which language the messages will be sent. English will be used as the
default language, if the message to be sent is not available in the target language on the system.
"
Level
" defines a filter for the Notifications.
To check the correctness of the entered data, a test message can be sent to the given receiver via
Test
message
.
1
Status icon
2
Event class (AIReset, AISet, WebHMI)
3
Time the event occurred up to ms
4
Moving up and down on the event table
5
Event text with message ID
Information
Alarms have to queue up a certain amount of time before a notification is sent. The pending alarms are sent, collected in a package.
