English
27
USE
INTERRUPTION OF POWER SUPPLY
Action
Function
Display
In the event of a brief interruption of the electrical current
while the stove is in operation, the stove will restart
automatically.
• The grate cleaning phase activates.
• The fan operates at full speed to allow the stove to cool.
• The readout "PUL" appears in the STOVE STATUS mode.
See the section on programming.
• The automatic stove restart cycle begins (functions
detailed in ‘STARTUP’ activate automatically).
• Once the ignition cycle has been completed the stove
operates normally at power level 2.
• The stove will continue operating normally at power level 2.
DT2040061-04
C L E A N I N G
1 2 : 0 0
2 2
!
!
1
.
c
The stove is fitted with a digital control panel to operate stove functions
when the LCD remote control is unavailable. The various functions of
the control panel are listed below.
1
2
3
1
3
5
2
8
7
4
6
DT2030332-00
Fig. 60
NUMBER
KEY / DISPLAY
DESCRIPTION
1
KEY 1 ON/OFF
Allows you to start up or shut down the product manually.
2
LED 2 ON/OFF LED
If the LED lights up, it indicates that the stove is lit.
3
KEY 3 INCREASE POWER
Allows you to increase the power setting. You can choose between the two available settings, P1-
P3. The Multifuoco fan has a default setting for each of the two power settings.
4
LED 4 INCREASE POWER LED
The LED lights up when the power-increase key is pressed and indicates that the power has been increased.
5
KEY 5 DECREASE POWER
Allows you to decrease the power setting. You can choose between the two available settings, P1-
P3. The Multifuoco fan has a default setting for each of the two power settings.
6
LED 4 DECREASE POWER LED The LED lights up when the power-decrease key is pressed and indicates that the power has been decreased.
7
LED 7 SAFETY DEVICE
If the LED lights up, it indicates that a safety device has activated. After approx. 60 seconds the
alarm signal will sound (if activated). In the event of activation proceed as follows:
• turn off the stove by pressing the ON/OFF key for several seconds;
• the alarm signal will stop;
• wait until you are sure that combustion of any pellets left in the grate has ceased;
• wait for the stove to cool, then check for and remove whatever has activated the safety device.
Finally, after having cleaned the grate, restart the stove by pressing the ON/OFF key.
8
LED 8 RADIO SIGNAL EMISSION The led lights up when the stove receives data from the remote control.
6.5 CONTROL PANEL - Fig. 60
DT2010222-07
