English
17
INSTALLATION
DT2030162-00
Fig. 26
DT2030213-00
Fig. 27
DT2030163-00
Fig. 25
External pressure switch
• The stove is fitted with an external pipe tap for measuring the
pressure (vacuum) in the flue gas outlet pipe. Authorised personnel
should carry out this verification and control whilst the stove is being
installed.
Cladding
• Having completed assembly of the stove and installed any external
room thermostat, proceed with assembly of the stove cladding,
referring to the ceramic cladding instruction booklet provided with the
stove.
• Piazzetta’s technological research and development mean that
this pellet stove offers the advantages of the ‘Multifuoco’ system,
a system exclusive to and patented by Gruppo Piazzetta S.p.A., a
true innovation in the field of pellet stoves.
• The ‘Multifuoco’ system revolutionises all methods of heat
circulation currently in use in pellet stoves: the heat produced by
the furnace is circulated into the atmosphere not only from the
base of the stove itself, it can also be directed via 75mm-diameter
flexible pipes to adjoining rooms (fig 26).
This exclusive heat distribution system offers many notable
advantages: even spread of temperatures; heating adjoining
rooms.
The heat produced is propelled by a fan and distributed via the
outlet at the back of the stove.
• The front grill is equipped with two deflectors (fig 27) to change
the direction of the heat current as it exits the front of the stove.
To deflect the heat current in the desired direction simply adjust
the angle of the deflectors (fig 30) using the lever provided (fig
29).
When the stove is lit, use the glove provided to carry out
this operation.
DT2010071-01
Pursuant to current regulations on the safety of electrical equipment, you must contact a Piazzetta After-Sales Service Centre or a qualified
electrician for all and any work connected with installation, maintenance or servicing that involves access to electrical parts.
DT2010991-00
5.0 INSTALLATION
5.1 MULTIFUOCO SYSTEM - Fig. 25 / 27
DT2010145-02
