English
37
USE
MULTICOMFORT
This function is used to choose the sensor for reading the room temperature: from the stove or from the remote control. To make the
most of the Multifuoco fan functions read the paragraphs MULTIFUOCO SYSTEM and MULTICOMFORT OPERATION.
Function
Action
Display
Select
the
M U L T I C O M F O R T
menu
Press the MENU key, then using the SELECT
MENU
key select the
MULTICOMFORT
menu.
Confirm by pressing the SET key
MENU
SET
ESC
OPT
Select the Select the
REMOTE CONTROL
SENSOR
(SELECT
RRC)
OR
STOVE
(SELCT STOVE)
Press the SELECT MENU
key and select
SELECT RRC
to read the room temperature from
the remote control or
SELCT STOVE
to read the
room temperature from the stove. Confirm by
pressing the SET key. After confirmation the
readout function enabled (FUNCTION ENGAGED)
will appear on the display and the remote control
will automatically return to the initial display.
MENU
SET
ESC
OPT
M U L T I
C O M F O R T
!
S E L E C T
R R C
!
DT2040070-04
The pellet stove is fitted with the Multicomfort function. This works in conjunction with the Multifuoco ventilation system to improve heat distribution.
It allows the room temperature to be read from the stove or from the remote control, so that the Multifuoco settings can be varied according to the
requirements of the rooms to be heated.
If the airflow from your stove has been ducted to other rooms you may read the temperature in the room where the stove is installed or in the room
where the remote control is situated.
Example: your stove is installed in a small room and you are ducting the heat only from the rear of the stove (see solution 1 under the paragraph
“MULTIFUOCO SYSTEM”). You can position the remote control in the room to where the hot air has been ducted and set the required temperature
from this room. To carry out the necessary settings see the Multicomfort menu.
S E L E C T
S T O V E
!
6.9 MULTICOMFORT
DT2010251-03
