Piazzetta M 360, Инструкция по установке, использованию и техническому обслуживанию

Страница: 27 / 48

27
M360 Firebox Installation Instructions February 2015
5.3 HOOD INSTALLATION
Remove the packaging from the hood.
At least two people must carry out this work.
Place the hood [A] in line with the pipe [B] and put it on top of a support
before fastening it.
It is possible to choose the angle of rotation of the hood: ask the cus-
tomer's opinion to decide on the direction of the smoke damper handle in
relation to the room.
Carefully fit the flange into position, ensuring that the threaded holes are
aligned with the respective flared holes in the flange. Wear gloves during this
procedure so as not to damage the enamel of the hood or the pipe. (Fig. 33)
The hood is fixed using the six screws TSPEI M5x16 [C] provided in the kit,
taking great care in fully tightening them. (Fig. 34)
5.4 POSITIONING THE APPLIANCE
Raise the base [A] towards the hood [B], only using the indicated lifting
eyebolts to lift it. (Fig. 35)
The product must be lifted using the indicated eyebolts. Do not hold the product
by the glass frames that are still in a lowered position.
Gruppo Piazzetta S.p.A. cannot be held responsible for any possible
malfunction, damage to property or injury to persons due to incorrect use or
installation of the product.
Remove the two central self-tapping screws [C] located under the hood [B].
Remove the base template [D] connected to the locating template [E].
(Fig. 36)