Piazzetta M 360, Инструкция по установке, использованию и техническому обслуживанию

Страница: 9 / 48

9
M360 Firebox Installation Instructions February 2015
If the stove is to be left unused for a prolonged period of time then it should be given a thorough clean to
remove ash and unburned fuel residues. To enable a good flow of air through the appliance to reduce
condensation and subsequent damage, leave the air controls fully open.
Extractor fan
There must not be an extractor fan fitted in the same room as the stove as this can cause the stove to emit
smoke and fumes into the room.
Aerosol sprays
Do not use an aerosol spray on or near the stove when it is alight.
Use of operating tools
Always use the operating tools provided when handling parts likely to be hot when the stove is in use.
Chimney Fires
If the chimney is thoroughly and regularly swept, chimney fires should not occur. However, if a chimney fire
does occur turn off the stove immediately and isolate the mains electricity supply (if applicable), and tightly
close the doors of the stove. This should cause the chimney fire to go out. If the chimney fire does not go
out when the above action is taken then the fire brigade should be called immediately. Do not relight the
stove until the chimney and flue ways have been cleaned and examined by a professional.
Permanent air vent
The stove requires a permanent and adequate air supply in order for it to operate safely and efficiently.
In accordance with current Building Regulations the installer may have fitted a permanent air supply vent
into the room in which the stove is installed to provide combustion air. This air vent should not under any
circumstances be shut off or sealed.
USER OPERATING INSTRUCTIONS
Please read the important notices given above before referring to the main instruction book for detailed
operating instructions.
Recommended fuels
Stoves may be designed to burn dry seasoned wood logs and/or solid mineral fuel as indicated in the main
stove manuals.
HETAS Ltd Approval
HETAS approval may be limited to specific fuel types as detailed in the main instruction manuals. Approval
does not cover the use of other fuels either alone or mixed with the recommended fuel, nor does it cover
instructions for the use of other fuels.