PI E-727 Скачать руководство пользователя страница 205

Страница: 205 / 240

User Manual

E727T0005, valid for E-727

BRO, 2019-06-28

Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany

Page 205 / 240

Phone +49 721 4846-0, Fax +49 721 4846-1019, Email

[email protected]

www.pi.ws

and copied the file to a directory on the PC. Make sure that this directory only contains the

current firmware file.

Example for a file name: E-727_DSP_FIRMWARE_HW_00000_FW_01008.hex.

Updating the firmware

Proceed as follows to update the firmware:
1.

Make sure that the

Power

switch of the E-727 is in the OFF position (0).

Connect the included wide-range-input power supply to the 24 VDC connection of the E-727

via the included adapter.

Connect the E-727 to the PC via USB interface (USB type B).

Switch on the E-727:

Connect the power cord of the wide-range-input power supply to the power socket.

Put the

Power

switch of the E-727 in the ON position (|).

The power-on/reboot sequence is finished when the

Power

LED is continuously lit. Only then

the E-727 is ready for the update.

Start the PI Firmware Update Wizard on the PC.

−

Use

Start > All programs > PI > PIFirmwareWizard

, or navigate to the folder, where the

PIFirmwareWizard is installed on your PC, and start it by double-clicking on

PIFirmwareWizard.exe

In the

Welcome

window, click

Next

(“Weiter” means “Next”, “Abbrechen” means “Abort”).

The

Select PI controller

window will open.

Make sure that

Select from list

is selected. Then select

GCS

as controller from the list:

Содержание E-727

















































































































































































































































Результаты поиска

Содержание E-727

Отзывы:

PI E-727, Руководство пользователя, Страница: 205 / 240

Результаты поиска

Содержание E-727

Отзывы: