PI E-727 Скачать руководство пользователя страница 10

Страница: 10 / 240

User Manual

E727T0005, valid for E-727

BRO, 2019-06-28

Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany

Page 10 / 240

Phone +49 721 4846-0, Fax +49 721 4846-1019, Email

[email protected]

www.pi.ws

Downloading Manuals

INFORMATION

If a manual is missing or problems occur with downloading:



Contact our customer service department (p. 234).

INFORMATION

For products that are supplied with software (CD in the scope of delivery), access to the manuals

is protected by a password. Protected contents are only displayed on the website after entering

the access data.
You need the CD of the product to obtain the access data.

For products with CD: Obtain access data

Insert the product CD into the PC drive.

Switch to the Manuals directory on the CD.

In the Manuals directory, open the Release News (file including

releasenews

in the file name).

Find the access data for the download of protected contents in the section "User login for

software download" in the Release News. Possibilities for the provision:

−

Link to a registration page for request of access data

−

Direct display of user name and password

If the access data have to be requested via a registration page:

Follow the link in the Release News.

Enter the information required for registration.

Click

Show login data

Find the user name and the password in the browser window.

Downloading Manuals

If you have requested via registration page the access data for protected contents (see above):



Click the links on the registration page to move to the contents for your product, and log in

there with the access data.

General procedure:
1.

Open the website

www.pi.ws

If access to the manuals is protected by a password:

Click

Login

Click

Search

Enter the product code up to the period (“E-727”) into the search field.

Click

Start search

or press the

Enter

key.

Open the corresponding product detail page in the list of search results:

If necessary: Scroll down the list.

Содержание E-727

















































































































































































































































Результаты поиска

Содержание E-727

Отзывы:

PI E-727, Руководство пользователя, Страница: 10 / 240

Результаты поиска

Содержание E-727

Отзывы: