8
PRECAUTIONS FOR SAFE OPERATION
When performing dry heat sterilisation,
securely close the internal and external doors
. Failure to
do so may cause burns.
During dry heat sterilisation,
plug the access hole with the silicon cap that is provided.
Failure to
do so may cause burns.
Do not use the unlock key to unlock the outer door during dry heat sterilisation even if a power
failure occurs.
Doing so may cause burns.
Do not look directly at UV light.
UV light is harmful to the eyes.
Do not push door switch with the inner door open.
Pressing door switch turns on UV lamp emitting
harmful light.
This unit must be plugged into a dedicated circuit protected by branch circuit breaker.
Use a dedicated power source as indicated on the rating label attached to the unit. A multiple-tap may
cause fire resulting from abnormal heating.
Never store corrosive substances such as acid or alkali
in this unit if the container cannot be
sealed. These may cause corrosion of inner components or electric parts.
Check the setting when starting up of operation after power failure or turning off of power
switch.
The stored items may be damaged due to the change of setting.
Be careful not to tip over the unit
during movement to prevent damage or injury.
Prepare a safety check sheet
(copy the last page) when you request any repair or maintenance for
the safety of service personnel.
Use caution to avoid burning.
Inside of outer door is hot during operation. Touching hot surface
may cause burn injury.
CAUTION
WARNING
