Making up styling parts
13 - 4
Fig. 13 - 06
●
Mark intersection ”A” using two radiuses
(Fig. 13-07):
R1 = dart length AL + 7 mm
R2 = half dart length AT + 3 mm.
●
Scribe outer contour of guide blade as shown in
Fig. 13-08
and cut out contour.
●
De-burr and polish cut edges.
●
Secure guide blade to guide-blade carrier.
●
Carry out a sewing test.
●
If necessary adjust guide blade on eccentric pin.
Fig. 13 - 07