Pfaff 3566-2/02, Инструкция по эксплуатации, Страница: 38 / 58

10 - 9
Programming
6 - SWITCHING OF INPUTS
In this function, after the code number is selected and verified with the enter key, the
corresponding output can be selected with number key 1 and reset with
number key 0 .
Code number Terminal Output board Output Function
8 1 A25 Y1.1 Guide blade back
Y12 Guide blade pressure (only
with feed table)
9 2 Y1.2 Guide blade forward
Y1 Guide blade forward (only
with feed table)
10 3 Y2 Guide blade right
11 4 Y3 Work holder up
12 5 Y4 Airblast on
13 6 Y5 Thread trapper on
14 7 Y6 Thread trapper up
15 8 K7 Thread trim on
(only on PFAFF 3566-2/02)
16 9 - free
17 10 - free
18 11 Y10 Thread tension release on
19 12 Y11 Small-part stop back
20 13 Y13 Brake for engaging depth
(only with feed table)
21 14 - free
22 15 - free
23 16 Y15 Suction on (only with feed table)
0 17 L14.1 Stepping motor, engaging depth, coil 1
1 18 L14.2 Stepping motor, engaging depth, coil 2
2 19 L14.3 Stepping motor, engaging depth, coil 3
3 20 L14.4 Stepping motor, engaging depth, coil 4
4 21 - free
5 22 Y7 Bobbin-thread monitor reset
(only on PFAFF 3566-3/02)
6 23 BOBRES Reset für Unterfadenwächter
7 24 REF Reference output for needle in
material
Special commands:
24 5 Y4 Airblast function (timed reset)
7 - SOFTWARE DATE
When this function is enabled, the date of the control software (CPU) is indicated.