10 - 15
Programming
●
Input a new angle setting, e.g. 5, in order to obtain a seam pattern corresponding with
Fig. 10-06
or accept the preset amount, then
●
press
enter key
immediately.
●
The input seam pattern is accepted by selecting the
SEWING
mode.
10
.06.02
Correcting the engaging depth
Fig. 10 - 06
9
Input lower than preset
Input higher than preset
Curved dart
Fig. 10 - 07
Fig. 10 - 08
●
Correction of the seam pattern in
Fig. 10-08
can be made on the control panel for
engaging depth quick-change from
–1.2 mm to +1.2 mm
.
●
See
Chapter 7.04 Control panel for engaging depth quick-change
.
Engaging depth correct
Engaging depth too little
(engaging depth
exaggreated)