10 - 11
Programming
10
.05
Making up and correcting a seam pattern (sequence)
In the
INPUT
mode a seam pattern can be made up or edited on control panel
1
using the
seam input key
.
Make sure that engaging quick-change
2
is set at "0", otherwise the inputs may
be wrongly read or the machine may be damaged!
●
Set the
INPUT
mode
●
Press the
seam input key
.
The diode in the key lights up and the display prompts for the program number.
●
Input the required program number using the
number keys
, e.g. 3.
●
Verify the input with the
enter key
.
After the
enter key
is pressed the cursor jumps automatically to the input for setting the
seam length (S-LG:).
●
Input the seam length 89 to 250 mm) using the
number keys
, e.g. 9 mm.
●
Verify the input with the
enter key
.
The cursor jumps to the input for stitch length (S-LG:).
●
Accept the basic stitch length or input a new one, e.g. 2.2 mm.
Fig. 10 - 04
2
1