10 - 13
Programming
Fig. 10 - 05
●
Select the
INPUT
mode.
●
Press the
seam input key
(diode lights up).
●
Input the required program number, e.g. 3.
●
Press the
enter key
.
●
Input the seam length, e.g. 9 mm.
( a seam line parallel to the crease edge of 9 mm min. is required. )
●
Press the
enter key
.
●
Input the stitch length, e.g. 2.2 mm.
●
Press the
enter key
.
●
Set the loading point at manual input.
●
Press the
enter key
.
●
Input the manual loading point, e.g. 155.
(corresponds with the length of the guide blade in use)
●
Press the
enter key
.
●
Input the starting point, e.g. 0.
●
Press the
enter key
.
●
Press the
start backtack key
(diode lights up).
The basic backtack length setting of the machine is indicated.
9
070
101 (angle-seam length)
110 (dart length)
12
Straight dart
(angle-seam depth)
(seam length)