Controls
7 - 2
7
.03
Control panel
Fig. 7 - 03
7
.03.01
Control panel displays
●
In the top line the setting is indicated under the symbol concerned.
Program number (from 0 to 99)
Over-all seam length (in mm)
Stitch length (in mm)
Loading point/starting point (in mm; no symbol)
Speed (in r.p.m.)
Piece counter
●
In the bottom line of the display different texts are shown (e.g. input prompts, error
signals, etc.). At the side of symbol # the text number of the indicated text is shown
(the text number serves for clear definition in the different languages).