SERVICE OPERATIONS
45
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
- Disconnect the oil vapour return pipe (2).
- Remove the pneumatic valve (3).
• 2 nuts Ø6 mm
- Remove the rocker cover.
• 4 Ø6 mm screw.
Tightening torque: 10 Nm.
- Rotate the engine by hand in the operating
direction in order to bring the rocker bearings on
the back of the cams.
- Using the set of feeler gauges, measure the
clearance of each valve.
Clearances:
• 0.12±0.02 mm at the intake.
• 0.12±0.02 mm at the exhaust.
3
2
