2. GENERAL PRECAUTIONS
2.1 To use the machine correctly, the user must have a thorough knowledge of these user
instructions and of all the hazards related to an improper use of the machine. Only expert
and authorised personnel must therefore use the machine.
2.2 Safety in the use of the machine can only be guaranteed for the functions and materials
listed in this instruction manual. PERTICI S.p.A. declines all liability if the machine is used
for purposes other than those stated and in ways that do not conform to the user
instructions.
2.3 PERTICI S.p.A. declines all liability for any matters relating to the safety, reliability and
performance of the machine if the instructions and recommendations given in this manual
are not observed, with particular reference to: assembly, use, routine and non-routine
maintenance and repair work.
2.4 The user’s electrical system must comply with 64-8 EEC Standards (CENELEC HD 384,
364 - 4/41 IEC).
The manufacturer accepts no liability if the machine is not correctly connected to the
unipotential ground circuit and if protective devices co-ordinated in such a way as to
guarantee the automatic breaking of the circuit in accordance with the above stated
specifications are not installed upstream of the machine.
2.5 Only original spare parts must be used for non-routine maintenance and repair work.
2.6 For all repair work, contact the technical assistance service designated by the supplier of the
machine. Responsibility for the perfect working order of the machine rests entirely with the
user if it is repaired or maintained incorrectly by non-specialist or unauthorised personnel.
2.7 In particular, maintenance work on the electrical equipment must be performed by specialist
or authorised personnel using original spare parts. The machine must be disconnected from
the electrical power supply before performing any of these operations.
2.8 The automatic corner cleaning machine is designed for the use in covered industrial
environments; any use in other areas relieves PERTICI S.p.A. of all liability.
2.9 The person in charge of the machine must be trained in the correct use of the machine
itself, the safety devices and accessory equipment.
2.10 The safety devices provided with the machine are already correctly installed and attached.
Both the safety devices and the entire machine must be submitted to routine and non-
routine maintenance procedures at the specified intervals.
2.11 Before starting each job and switching on the machine, make sure that there are no chips
or waste material from previous jobs on the work surface.
2.12 The operator must wear suitable clothing and use the correct safety equipment for the type
of work being performed (protective gloves, soundproofed ear guards, safety goggles).
Never wear bracelets or other articles, which may be caught up in the machine.
2.13 Before starting any job with the machine, ensure that there are no persons or other
potential sources of danger in the vicinity of the machine (an area of 150 cm around the
machine)
(DWG. A1.9)
MANUALE D’ISTRUZIONE PER L’USO E LA
MANUTENZIONE PULITRICE AUTOMATICA CM4S
5
File: 2240.doc - 03/11/03 14:27
