PerkinElmer OPERETTA, Техническое руководство

Страница: 28 / 62

2.3.2 Live Cell Chamber
The Live Cell Chamber can be moved on a guide rail. If you move it to the left you
can access the sample chamber, the table, the objectives etc. If you want to use
climatization, you have to move it all the way to the right, so that it seals the sample
chamber and the electrical connector is plugged to its counterpart. The flow of carbon
dioxide is only active if the
Live Cell Chamber is closed (moved to the right) and CO
2
has been activated in the TCO Settings of the Harmony software. If you move the
Live Cell Chamber to the left, the climate in the sample chamber is lost and you have
to wait until the target values have been reached and stabilized again.
Inside the Live Cell Chamber there are heating elements for controlling the
temperature. On the bottom of the Live Cell Chamber there is an additional
transmission light source, because the default transmission light source inside the
swivel arm cannot be used in combination with climatization. Although both LEDs
have the same specification, slightly different exposure times or transmission power
values may be necessary to achieve the same results (due to adjustment and
tolerances).
The Live Cell Chamber can be removed completely, e.g. for cleaning.
1. Electrical connector
2. Transmission light source
2 Hardware Description
28 Operetta Technical Manual