PerkinElmer OPERETTA, Техническое руководство

Страница: 21 / 62

2.2 Operetta Device
2.2.1 Right Side
1. Power line
2. Fuses
3. Flap for scanning table (only for automation upgrade): Only with the automation
upgrade the scanning table can move out of the housing to a handover position for
sample carrier exchange by the plate::handler II robot. Due to safety reasons this
flap is locked for instruments without this upgrade.
Warning!
Moving scanning table – Risk of crushing
If the table can move out of the housing (automation upgrade), the
table can cause injuries if the provided protective shields are not
installed and if you reach into the danger area of table or robot.
l
Do not use an Operetta without protective shields installed if the
scanning table flap is unlocked.
l
The table in/out functionality may not be used for manual
exchange of sample plates.
l
Do not manipulate the interlocks of the lid or the protective
doors and shields (automation upgrade).
l
Do not reach into the danger area of the scanning table.
l
Do not reach inside the Operetta through the scanning table
flap.
l
If the Operetta is integrated into a third-party automation
system, the manufacturer has to install suitable protective
shields so that the moving scanning table is no source of danger
anymore.
2 Hardware Description
Operetta Technical Manual 21