PerkinElmer OPERETTA, Техническое руководство

Страница: 23 / 62

Notice
Do not open the filter access door unless requested by the Change
Filter wizard (see chapter 3 "Retooling and Maintenance", page 33)
when changing the emission filter.
The filter access door is not interlock-protected. If the filter wheel is
rotating and you reach into the wheel with your hand, this can
damage the instrument.
2. Balcony with status light
The LEDs inside the balcony indicate the Operetta status. See also next chapter.
3. Sample lid with progress LEDs
The 24 LEDs arranged in a 4×6 pattern on the lid indicate the progress of a
measurement on a percentage basis. During normal operation, the sample lid of
the Operetta is closed. The lid may only be opened in the following situations
upon prior permission from Harmony:
o Exchange sample carrier:
Use the Open Lid button in Harmony. For details please see Operetta
Operation Manual , section 3.15 "Open Lid".
o
Exchange or clean objective:
Use the Change Objective function in Harmony ( Settings dialog). For
details please see Operetta Operation Manual , section 3.16.2 "Change
Objective".
o
Adjust correction collar:
Use the Set Correction Collar function in Harmony ( Settings dialog). For
details please see Operetta Operation Manual , section 3.16.1 "Set
Correction Collar".
Notice
l
Do not open the sample lid without prior permission from
Harmony. If you open the lid during a measurement or during
initialization, this can lead to errors and to the loss of data.
l
If you open the lid, lift it at least by 10 cm before you close it
again. Otherwise the interlock cannot detect that the lid has
been closed.
2 Hardware Description
Operetta Technical Manual 23